Mobile repeater solutions

types: DVB-T DVB-H Analogue	Specifications for Mobile repeater solutions view in PDF.
	Elti has developed .... … new age of digital networks demands for mobile repeater solutions. The new repeater point is built out of ELTI products and especially designed to minimize costs and optimize performance. the Elti advantage Turn key solution Versatile use for analogue and digital networks Cost efficient solution Complete solution Elti offers complete solution for mobile repeater stations. All in one cabinet with self supported tower. What is required from your side is the place, electricity and RF signal in the air. Complete solution is integration of a wide range of Elti products you may choose from Gap-fillers / repeaters Outdoor cabinet Transmitting antenna systems Receiving antenna systems Self supporting tower Gap-fillers / repeaters For DVB-T/H networks please check the sites: MFN networks ARX regenerative repeater SFN networks HALO Gap filler with echo canceller For Analogue networks TV Translator Outdoor cabinet Provides cost efficient solution for implementing the repeater point to places without established facilities. It is suitable for climatic conditions raging from -50 to +50°C. It features integrated heating and air condition. Ambient temperature degree Celsius Maximum heat dissipation Maximum power of Elti device -50 to +50 800 W <= 50 W rms -50 to +50 1.500 W <= 100 W rms -50 to +30 2.000 W <= 250 W rms Dimensions (w x h x d): 994 x 1.638 x 1348 mm Weight 292 kg (cabinet) + 32,6 kg (ventilating and heating unit) Protection level IP 54 Input voltage 230 VAC, 50 Hz, maximum input current 40A Output voltage 230 VAC, 50Hz, maximum output current 4x10A, 3x16A Transmitting antenna system Elti provides versatile range of antennas and antenna systems for achieving maximum coverage. Please check the sites for more information: VHF antennas Four field antenna panel TA III/03-R and Eight field antenna panel TAN III/10 VHF antenna systems Antenna system design with TA III/03-R and Antenna system design with TAN III/10 UHF antennas Four field antenna panel TVA 24/50, Eight field antenna panel TVA 31/50- horizontal polarization and Eight field antenna panel TVA 51/50- vertical polarization. UHF antenna systems Antenna system design with TVA 31/50- horizontal polarization and Antenna system design with TVA 51/50 - vertical polarization. Receiving antennas Elti provides antennas for reception of RF signal. Please check the sites for more information: VHF antennas - Yagi antennas TA III/08-A and TA III/08-B UHF antenna - log peridodic antenna LAP 4/5-16/50 Self supporting tower Elti provides self supporting towers for accommodation of transmitting antenna system and receiving antenna. Typical heights are 10, 12 and 15 meters.