Coaxial
RF Connectors
Coaxial connectors type EIA
Coaxial connectors type EIA

TYPES:

  • Short Coupilng Elements with gaskets and screws
  • Gas inlet valves
  • Panel connectors
  • Elbows
  • Multipoint adapters
  • Cable connectors, clamp type, inner conductor added
    • EIA 7/8" (i.e. RG, RFF, SCF, LCF, HCA, LDF, Sucofeed and Eupen cables)
    • EIA 1 5/8" (i.e. LCF, HCA, LDF, AVA, Sucofeed and Eupen cables)
    • EIA 3 1/8" (i.e. LCF and HCA cables)
    • EIA 4 1/2" (i.e. HCA cables)
    • EIA 6 1/8" (i.e. HCA cables)

IEC 339 & EIA RS-225

These quality connectors and additional supporting elements are the result of decades of experience. The whole range is designed to withstand severe environmental conditions. Precise manufacturing enables solid connections and low intermodulation (IMD) products.

The EIA family of coaxial connectors are available in 7/8”, 1 5/8”, 3 1/8”, 4 1/2” and 6 1/8”, all of which are suitable for RF applications. They support cables with foam dielectric and air-dielectric cables.

Connectors are delivered with an added inner conductor, and most are ’straight type’ connectors.

Supporting elements such as couplings, gas barriers and gas inlet valves are also available for a complete installation solution.

Technical data

RF connectors EIA - technical specifications A

RF connectors EIA - technical specifications C

RF connectors EIA - technical data B

 

Elti connectors are suitable for all major cable manufacturers. Each type of connector suits designated cable type. The only differences are at foam cables 7/8" and 1 5/8". RFS produces this cable with larger inner diameter; therefore inner is rather different than from other suppliers. When ordering specify for which cable the connector is required.

Following tables will help you find the product you are looking for.

Connectors for RG cables

 

EIA connectors for foam cables

 

RF connectors for air dielectric cables

 

 

Similar products:



« back